TRENDnet TW100-BRV214 4-Port VPN Router, TW100BRV214

• 4 x 10/100 Mbps Auto-MDIX LAN ports
• 1 x 10/100 Mbps WAN port (Internet)
• On/off button
• Compatible with most popular cable/DSL Internet service providers using Dynamic/Static IP, PPPoE, PPTP and L2TP protocols
• Firewall protection with Network Address Translation (NAT), Stateful Packet Inspection (SPI), and Denial of Service (DoS) prevention
• Supports up to 80* PPTP/L2TP/IPsec tunnels
• Supports up to 100 PPTP/L2TP/IPsec VPN pass through sessions
• Supports up to 8 Generic Routing Encapsulation (GRE) tunnels
• Access Control: Virtual Servers, MAC/IP Packet Filters, URL/Keyword Filters, Demilitarized Zone (DMZ) host, and One-to-One NAT
• Set device time using Network Time Protocol (NTP) and define schedules for Virtual Server, Packet Filters, and Quality of Service (QoS)
• Quality of Service (QoS) traffic prioritization via IP/(TCP/UDP) ports with 3 priority queues
• Universal Plug and Play (UPnP) for auto discovery and support for device configuration of Internet applications
• Supports Internet Group Multicast Protocol IGMPv1/2 pass through for multicast applications
• Supports static and dynamic RIP v1/2 routing
• Dynamic DNS Client for dynamic Internet IP resolution
• Device monitoring using the Internal System Log, External Syslog, E-mail Alert,  and SNMPv1/2c
• Local/Remote management via Web browser, upgrade firmware, and backup/restore configuration
• 3- year limited warranty

* The number of supported concurrent VPN tunnels is dependent upon available bandwidth

Hardware Standards IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX) WAN 1 x 10/100Mbps Auto-MDIX port (Internet) LAN 4 x 10/100Mbps Auto-MDIX ports Power Switch On/off power switch Reset Button Reset button - Factory Default (Hold for 20 seconds) Connection Type Dynamic IP, Static (fixed) IP, PPPoE, PPTP, L2TP Firewall NAT, SPI, and DoS prevention VPN IPsec/PPTP/L2TP– Up to 80* tunnels
PPTP/L2TP Server and Client – Define up to 5 user accounts each (multiple logins per account)
IPsec/L2TP/PPTP VPN pass through – Up to 100 sessions
GRE – Up to 8 tunnels IPsec VPN Protocols Encryption (DES, 3DES, AES-128/192/256 bit), Authentication (MD5, SHA1), DH/PFS Groups (1-18), Key Management (Manual/IKE), Preshared Key (PSK), Encapsulation (ESP, AH, ESP+AH), Mode (Main/Aggressive), NAT Traversal, NetBIOS over IPsec, XAUTH, Keep-Alive, Dead Peer Detection (DPD), Local/Remote ID (FQDN, E-Mail, Key ID) PPTP/L2TP VPN Protocols Authentication (PAP, CHAP, MS-CHAP v1/2), Encryption (MPPE-40/56/128 bit) Access Control Virtual Servers, Packet MAC/IP Packet Filters, URL/Keyword Filters, DMZ host, One-to-One NAT, UPnP, and IGMPv1/2 pass through Time/Schedule Set time via NTP or manually and define schedules: virtual server, packet filters, and QoS Routing Static and Dynamic RIP v1/2 Quality of Service Service-Based IP/(TCP/UDP) port with 3 priority queues (High, Normal, Low) Management/ Monitoring Local/remote configuration, upgrade firmware, Backup/Restore configuration via Web browser
Internal System Log, Syslog, E-Mail Alert, SNMPv1/v2c, Ping Test Tool, and Wake-on-LAN (WoL) LED Indicator Status, LAN1~LAN4, WAN (Internet) Power

• Input: 100~240V AC, 50~60Hz
• Output: 12V DC, 1A

Power Consumption 4.08 Watts (max.) Dimension
(L x W x H) 189 x 118 x 33 mm (7.4 x 4.6 x 1.3 in) Weight 249 g (8.8 oz) Temperature

• Operation: 0°~ 40°C (32°F~ 104°F)
• Storage: -10°~ 90°C (14°F~158 °F)

Humidity Max. 95% (non-condensing) Certifications CE, FCC