TRENDnet TV-VS1P 1-Channel PoE Analog/IP Encode, TVVS1P

• IEEE 802.3af PoE compliant device
• 1 x 10/100Mbps PoE Auto-MDIX RJ-45 port
• Optional power port for non-PoE installations
• SD/SDHC card slot *
• BNC video out and video in connectors
• Audio support: built-in Audio jacks for additional 3rd party microphone and speaker
• Input/Output ports (GPIO) to network to alarm systems
• Diagnostic Power and Link LEDs
• Four installation mounting points
• 3x digital zoom
• Pelco D and Pelco P pan/tilt/zoom support: Define Auto-Patrol pan tilt with up to 32 viewing nodes
• High quality H.264, MPEG-4, and MJPEG video recording
• Resolution up to 704 x 576 pixels and up to 30 frames per second (fps)
• Stream Internet camera video to a 3GPP compatible wireless device
• Dynamic DNS support
• Images controls: brightness, saturation, contrast, Hue ,and Wide Dynamic Range Correction (WDRC)
• Time, date, and other text overlays
• Mask overlays conceal sensitive areas
• Supports TCP/IP networking, SMTP Email, HTTP, and other Internet protocols
• Recording type: continuous, schedule, or motion detection
• Record streaming video to your computer or Network Storage device with Samba support
• Three motion detection windows with just-in-time snapshot , motion detection triggered email alerts, and image upload to FTP
• Event trigger: motion detection or Input/Output signal
• Event response: email alert, instant snapshot, or video recording
• Send instant messages to Jabber client via Jabber Server
• Supports Quality of Service (QoS) with Differentiated Services Code Point (DSCP)
• Quick Universal Plug and Play (UPnP) installation
• 3-year limited warranty

*  SD/SDHC card sold separately

General Video

• Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms ; BNC connecter
• Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter

Audio

• Line Input: 3.5mm jack (CCTP audio)
• Line Output: 3.5mm jack (Speaker)
• S/N Ratio: < 60dB
• Format: PCM/AMR
• 2 Way audio supported

GPIO Ground, GPIO in/out, DV12V output, RS485 TX+/TX- SD Slot Supports SD/SDHC (up to 32GB) Pan/Tilt/Zoom Protocol: Pelco D and Pelco P
32 presets
Auto Patrol Hardware Network IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX
IEEE 802.3af PoE LED Power, Link Reset Button Push and release to reboot
Push and hold for 5 seconds to restore to factory default Power Consumption 7 Watts Power 12V, 1.5A external power adapter (for non-PoE installation) Dimension 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.) Weight 445 g (15.7 oz.) Temperature

• Operating: 0°C ~ 45°C (32°F ~ 113°F)
• Storage: -15°C ~ 60°C (5°F ~ 140°F)

Humidity Max. 85% (non-condensing) Certifications CE, FCC Requirement Management Interface Internet Explorer 6.0 or above To run Utility Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit) Network Protocols TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP Management Remote Remote management supported Backup / Restore Save/retrieve configuration files Settings Image Brightness, contrast, saturation, mirror (horizontal/vertical) Video Encoder Encoding type: H.264, MPEG4, MJPEG
Resolution/frame rate(auto-sensing)

• 704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC)
• 704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL)

Compression: 5 levels Recording Recording type: continuous, schedule, or motion detection Port Settings HTTP port: 80 (default), RTSP (554) Digital Zoom 3x Dynamic DNS Yes Time Synchronize with NTP server or set time/date manually SMTP Supported up to 2 destination accounts System Log 100 items